How to reduce ring size at home and in the workshop?

Where is the ring size reduced?

The most reliable option is to contact a workshop that provides such services. This could be a jeweler you know through friends or whose services you have already used. If such a craftsman is unknown to you, find out if there is a workshop at the salon where you purchased the jewelry and contact there.

When you need to use the services of a completely unfamiliar master, ask a few things in advance:

What technology will he use to obtain the result;
Will there be any risks during the work, and if so, what are they;
Does the master give a guarantee that the product will be changed with high quality, without damage.

The significant question is whether the cut-out part of the gold or silver ring will be returned to you if this method of reducing the size of the product is used.

In what cases can a ring size be reduced?

However, even an experienced jeweler will not take on the job in all cases. The easiest way to adjust the size of a gold or silver wedding ring that does not have any decorations.

Difficulties may arise if:

the product is decorated with stone or engraving;
it is necessary to reduce the openwork ring, decorated with small stones or droplets of other metal;
the size of the new product should be 3 sizes or more smaller;
the ring is made of titanium - working with it involves some technical difficulties;
The material of the product is platinum, the processing of which requires special equipment.

Important! At the same time, jewelers note that if you need to reduce the size of a men’s signet ring or there is only one stone in the product, then you can change the size without difficulty.

Is it possible to change a wedding ring?

Is it possible to change the wedding ring? Wedding rings are a symbol of marriage, and changing them every year is a bad idea. But wedding rings can get damaged or lost.

Sometimes, due to some changes in the body, people become allergic to the metal included in the alloy of the ring

In such cases, it is necessary to change the wedding symbol to a new decoration and it is important to do it correctly

After the wedding ceremony at the registry office

Is it possible to exchange wedding rings for new ones?
Is it possible to change wedding rings after the wedding? It is believed that after the exchange of wedding rings during a secular wedding procedure in the registry office, they become a symbol of the family. People have an ambivalent attitude towards replacing them with new jewelry. Some believe that they have no sacred meaning and can be easily replaced with new ones. Others are of the opinion that marriage symbols are a family talisman and do not need to be changed. The new ring you like should be selected for another finger and worn as normal jewelry. Therefore, before planning to purchase new wedding symbols, discuss this issue with your significant other.

There are three compelling arguments in favor of changing rings:

The newlyweds had a very modest wedding budget, and therefore did not buy the rings they liked.
A young couple purchased jewelry with a very original design, which looks too pretentious on older people.
We acquired symbols from materials that could not be adjusted in size, and the thickness of the finger changed. For example, titanium or jewelry ceramics.

In the above cases, it would be appropriate to exchange new symbols of marriage for some round wedding anniversary. This exchange is considered a positive sign. After all, over the years you have lived together, your romantic relationship has moved to a new level, becoming calmer, but at the same time deep and mature.

After the wedding in the church

The rings participating in the wedding sacrament lay on the altar. By exchanging them, the newlyweds promised in the face of God to remain faithful and love each other all their lives. Through them, the couple received divine blessings and protection for their family.

Therefore, it is strictly not recommended to change them on a whim. The wedding ring should be changed only in case of urgent need:

lost;
deteriorated as a result of contact with some aggressive substance or mechanical impact;
an allergy to the metal contained in the alloy of the product has appeared.

According to church canons, you need to purchase smooth gold or silver jewelry for a wedding. In them, the size can be easily adjusted in any jewelry workshop. To change the size of a platinum product you need special equipment, and it is not available everywhere.

Titanium jewelry cannot be adjusted. It is problematic to narrow or widen openwork rings strewn with pebbles or with engraving on the outside.

How to reduce ring size at home?

The services of a workshop may not always be needed: if you need to adjust the size of a product by only half a size or the ring belongs to costume jewelry, then you can try to do this yourself at home using one of the following methods:

Epoxy adhesive. Any other building mixture that hardens quickly and is transparent (for example, Czech epoxy resin) is also suitable. Having prepared the mixture according to the instructions (it should be quite thick), secure the ring horizontally and use a toothpick to apply several layers of the mixture to the lower inner surface. Leave to harden for a day.
Colorless nail polish. Similar to the previous method, only more labor-intensive - the varnish will have to be applied at least 10 times. However, this method is the most accessible and easily renewable if necessary. And relatively durable - up to 3 months.
Homemade tab. It is made from a piece of IV tube or an empty gel stick. Carefully cut a piece of tube (0.7-1 cm) lengthwise, lightly melt the jagged edges on the side cuts with a match. Holding the piece placed on a thin stick, open the edges and secure it to the bottom of the ring.
Tools at hand. Such methods include winding a nylon thread around a ring or gluing a strip of flesh-colored adhesive plaster onto a finger. Most often, such products are short-lived and are only suitable for one-time use when urgently needed.
Silicone tab. This is a special accessory that can be purchased at a jewelry store. This tab is made from a safe, durable and natural material, but its durability is low - only one month. To reduce the size of the ring, simply insert the tab inside the product.
Making a 3-D double. In a specialized printing house, the designer will make a 3-D model of your ring, using transparent polymer in just 15 minutes. They will make a copy of the product, but in the required size. This insert is quite durable (up to 1 year) and can be used to reduce the size of any ring.

Important! There are times when a ring is expensive enough to experiment with yourself (for example, with diamonds), but workshops will not undertake the work.
In this case, one of the most effective and affordable methods, although not very convenient, is to wear a piece of suitable size over a large ring - it will not allow your jewelry to fall off unnoticed or at the wrong time.

Best withdrawal methods

There are several effective ways to help remove a stuck ring from your finger. Each of them is quite effective, especially if you use them immediately after identifying the problem.

Thread

This method will help you remove a wedding or other ring if it is slightly deformed, a very swollen finger or an injury. The execution algorithm will be as follows:

Take a silk or nylon thread approximately 1 m long. From the side of the palm, pass it through the ring, leaving the end no more than 15 cm. Pull a longer piece through the decoration on the back of the hand. Wrap it tightly around your finger over the ring all the way to the tip

In this case, there should be no gaps between the rows. Very carefully pull the end of the thread located on the palm side. Perform the action until the decoration is removed.

Important! Do not keep your finger wrapped in thread for more than 20 minutes. If this method does not help, then it is better to use another or seek medical help.

Water and soap

The most popular way to remove a wedding ring or any other ring from a swollen finger is soaping. It's quite simple to use. To do this you need:

hold your hand in cold water for a while;
thoroughly soap your finger;
Remove the ring using gentle circular movements.

For minor swelling, this method will help remove the stuck ring in a matter of seconds.

Ice or cold water

To do this, place your finger in cold water for a few minutes or rub a small piece of ice on it. This should reduce blood flow and relieve swelling.

After which the jewelry is carefully removed in a circular motion.

Using glidants

This method is somewhat similar to soaping, but it does not use water. It will ideally cope with its task if there is slight swelling, no injury or deformation of the ring. Execution algorithm:

Apply any gliding agent (pork fat, vegetable oil, liquid soap, shampoo, etc.) to your finger.
Rub thoroughly so that as much of the composition as possible gets under the decoration.
Using gentle circular movements from the base of the finger towards the tip, remove the ring.

To prevent your fingers from slipping, you can use a piece of thick fabric that you need to place on the ring.

Salt bath

This method effectively removes swelling and constricts blood vessels, after which the jewelry stuck on the finger can be removed without much difficulty. Mode of application:

Dilute 3 tbsp in 250 ml of cold water. l. salt.
Place your finger in the solution for 15 minutes.
Using gentle circular movements, remove the ring.

After the procedure, you need to wash the salt off your hands under running water and apply a soothing or nourishing cream.

Use of medications

anti-inflammatory drugs - Diclofenac or Naproxen-Acri;
antitumor ointments - “Lioton”, “Troxevasin”, “Troxerutin”, “Heparin ointment”, etc.;
antibacterial substances - aloe juice, ethanol and others;
compresses with antiseptic agents - “Novocaine”, “Procaine” and others.

Important! To exclude an allergic reaction and individual intolerance, medications should be used after consulting a doctor.

A ring stuck on your finger is a rather unpleasant and painful situation. To prevent it, you need to follow a number of mandatory rules - choose jewelry according to size, do not wear it in hot weather and during pregnancy, take it off while doing housework.

How to reduce ring size in a workshop?

A good jeweler will not undertake such work if there is a risk of damaging the appearance of the product. This should be taken into account when buying a ring in an online store or purchasing paired items for a wedding. Although there is always a risk of losing or increasing body weight, which will certainly affect the size of the finger circumference.

Still, contacting a jeweler is the most reliable way, whose services you should use if you need to reduce the size of your ring.

To do this, professionals use the following technologies:

Cutting out part of the product. The easiest way is when the master cuts out a section at the bottom of the ring that interferes with normal wearing. Typically, to reduce by 1 size, you need to remove 3.14 mm of the circumference. After this, the edges are soldered and ground, which makes the seam completely invisible. For products with stones, craftsmen use laser soldering, which allows them not to be removed from the ring;
Squeezing. The method is suitable for the simplest products, without decorations, ornaments and stones. First, the jeweler heats the ring, then cools it and places it in a special cone. After this, the product is covered with a ball with a punch and forged with a hammer. The softened metal, descending along a tapering cone, decreases in volume and becomes denser. Upon reaching the desired size, the master takes out the ring and polishes it;
Adding metal. The method is the most expensive and least popular, but sometimes for expensive or antique products it is the only possible one. In this case, a smaller ring is inserted inside the ring in order to adjust the internal volume to the desired size.

Important! If the product contains a precious stone, before work, make sure that the master removes it from the ring and then re-attaches it. Otherwise, the fastenings may become deformed and the stone will not sit as firmly as before.

Reducing rings with stones, inserts

To make a ring with a diamond or other settings smaller, it may be necessary to remove the stones during the repair. When the accessory is reduced, the inserts will be returned to their original place. This procedure with stones is done for several reasons:

Reducing the rings involves heating the metal. Stones can also come under the influence of the burner flame. Some types of inserts can change their color due to high temperatures. To prevent this process, the client must be informed of the possible risks and asked to remove the inlay.
It is recommended to remove large stones during jewelry ring reduction, as their fastening may be damaged. The reliability of the frame is reduced, so the risk of losing the precious insert increases. On some jewelry, craftsmen completely cut off the fasteners while working, and after reducing the diameter, solder them back.

Before taking a ring with precious stones for repair, it is recommended to contact an organization that will give an independent assessment of the product. This document will allow you to protect yourself from unscrupulous craftsmen who, during repairs, can replace the gemstone with a fake.

Cost of jewelry work

You finally decided to trust the professionals and go to a jewelry workshop. This is a more reliable and thorough method, although it requires some costs:

If it is possible to reduce the ring by cutting or squeezing, the price will start from 400 rubles. – for the simplest products.
If common methods are not possible, then the master may request from 1000 rubles. and higher for adding metal inside the product, and sometimes when the work is highly complex, jewelers completely refuse to adjust the sizes.

Important! The cost of downsizing a ring will increase as the complexity of the ring's shape increases, and depending on the value of the stones and their number.
The simplest treatment can be completed in 30-40 minutes. , for more complex processes it will take up to 3 days.

Content:

The first, most obvious option is to take the ring to a jeweler, who will reduce its diameter or increase it depending on what you need. But at the same time, this is also the most expensive option - you will have to pay a considerable amount of money for the procedure.

If you choose the first option, then it is important for you to find a good performer so as not to regret the result later. The best option would be to meet with the master in person and discuss all the conditions and the result you want. Please note that depending on the complexity of the ring, the price of the work can vary significantly, since complex, composite exclusive items require more and more painstaking work. In some cases, many masters even refuse such work, and those who take it on will charge you a lot of money. Keep this in mind.

In what cases should it be reduced?

Reducing the ring size may be necessary in several cases:

if you have lost weight;
if the ring was inherited;
if it was given to you without first trying it on.

The size of cheap jewelry can be easily adjusted using home methods, even try cutting out a piece at the bottom of the product. However, for expensive rings it is better to use the services of professionals who will guarantee the safety of the appearance of the product.

If you are just about to purchase a ring, then try to try it on. However, remember that this should not be done if your fingers are very cold or swollen - in this case, there is a risk of choosing the wrong size of the product.